User Manual
Smart Control Panel - Berlin 10"
SKU: P-DSP-BER
Separate the base from panel
Fasten the base to the wall box with the mounting screws (M4 × 25 or M4 × 45).
Fix the display back onto the base with the mounting screws (M2 × 4).
Note: Do not overtighten the screws; this can deform or damage the screen or hardware.
If the display is not flat after installation, do not press on the screen. Check the wall box and base installation first.
| Relay Type | 2-way relay 200W per circuit |
| Touch Screen Dimension | 10.1 inch |
| Touch Screen Resolution | 1920x1200px pixels |
| Operating Temperature | +32 - +104 |
| Operating Temperature (°C) | 0 - +40 |
| Operating Humidity | 5 - 90 , Non-condensing % RH |
| IP Rating | IP20 |
| LED Indicators | Yes |
| CPU | RK3566 Quad core Cortex-A55 |
| Operating System | Android |
| OS Version | 11 |
| Memory (RAM) | 2 GB |
| Memory (ROM) | 16 GB |
| Connectivity | 10M/100M Ethernet RJ45, 2.4GHz Wi-Fi (802.11 b/g/n), Zigbee |
| Built-in Sensors | Temperature, Humidity, Brightness |
| Warranty | 2 years |
| Input Power | 230V AC 50-60Hz 0.3A |
| Power Consumption | 10.0 W |
| Current | 10.0 A |
| Max Load | 10A |
| Panel Material | ABS+PC material |
| Product Color | Grey |
| Mounting Type | Wall mount |
| Mounting Box | 86x86x50mm |
| Bolt Hole Distance | 60 mm |
| Wiring Requirements | N - Neutral, L - Live |
PIERRE Berlin 10" display – wiring diagram
| Run | Wires | Cross-section | Cable type | Conductors |
|---|---|---|---|---|
| From PIERRE Display to Electric box (Required) | 2 | 1.5 mm² | NYM-O | L, N |
| From PIERRE Display to Consumer (Optional) | 3 | 1.5 mm² | NYM-O | L1, L2, N |
| From PIERRE Display to Network Switch (Recommended) | 1 | - | Cat 5e U/UTP | - |
PIERRE Academy videos for the Berlin display: