User Manual
Smart Control Panel - Oslo 10.1"
SKU: P-DSP-OSL
| CE Marking | Yes |
| RoHS Compliant | Yes |
| Warranty | 2 years |
| Touch Screen Dimension | 10.1 inch |
| Touch Screen Resolution | 1280x800px pixels |
| Power Supply | 100-240V AC 50-60Hz |
| Max Load | 1000W |
| CPU | Rockchip PX30 |
| Operating System | Android |
| OS Version | 10 |
| Memory (RAM) | 2 GB |
| Memory (ROM) | 16 GB |
| Width | 243 mm |
| Height | 150 mm |
| Depth | 11.9 mm |
| Panel Material | ABS+PC material |
| Mounting Type | Wall mount |
| Mounting Box | 86x86x50mm |
| Wiring Requirements | N - Neutral, L - Live |
| Connectivity | 10M/100M Ethernet RJ45, 2.4GHz Wi-Fi (802.11 b/g/n), Zigbee, Modbus |
| Built-in Sensors | Temperature, Humidity, Brightness |
| Number of Channels | 2 channels |
| Operating Temperature (°C) | -25°C - +55°C |
| Operating Humidity | ≤ 93% RH % RH |
| IP Rating | IP20 |
Separate the base from panel into two parts: the display screen and the power supply module.
Please reserve 86 type electrical box opening and provide live, neutral and ethernet wires in the wall for installation.
Fix the display back onto the base with the mounting screws.
Note: Do not overtighten the screws; this can deform or damage the screen or hardware.
PIERRE Oslo wiring
Follow the steps below to add the Helsinki display.
Yes. Swipe down from the top of the display to open the menu, where you find the sound settings.
No. Displays connect to the system through the network, wired or wireless, and do not need a direct connection to the Controller.
Yes. A smaller display can be replaced with a larger one.
No. The displays are not waterproof and are not suitable for areas exposed to moisture or rain.
No. A temperature sensor integrated in the PIERRE system can monitor the room temperature and control the heating/cooling devices.
Yes. PIERRE offers its own smart thermostats; see the thermostat product category.
Yes. The Helsinki display has a built-in temperature and humidity sensor and two relays, so it can control heating/cooling devices like a thermostat.
Yes. The Helsinki display has a built-in temperature sensor and can replace an old thermostat.
Yes. The display relays can control underfloor heating valves as well as other heating and cooling devices.
PIERRE temperature sensors are available in wired and wireless versions; see the product specifications for the accuracy of each sensor.
At least one sensor for basic heating/cooling control. Install a sensor in every heating/cooling zone or room where you want individual temperature control.
A mains supply (2 × 1.5 mm², L and N) and a network connection through a UTP (Cat 5e) cable.
With a PIERRE Pro Controller and an M-Bus to Modbus converter. The heat meters are connected to the M-Bus side of the converter.
Yes. The temperature can be controlled room by room.
Not always, but it is often useful.
Not necessary if: the sensor is factory-calibrated (±0.5 °C or better); the application does not need high precision (comfort heating/cooling in a home); the installation location is good (away from direct sun, drafts and heat sources).
Useful if: the displayed temperature does not match a reliable reference thermometer; the device is installed where it is affected by heat from electronics, sunlight or poor airflow; the system needs precise control (HVAC, energy optimisation).
In the Smart PIERRE app, calibration is optional. You can add or subtract an offset to fine-tune the reading.