User Manual
Water Leak Sensor Flexi
SKU: PW-SNS-WATER-FLEXI
H: 52 mm
W: 26 mm
D: 13 mm
The PIERRE Wave (Zigbee 3.0, 2.4 GHz) system consists of the following components.
Required
Optional
Operation: the gateway connects to the router by Wi-Fi or LAN. PIERRE Wave products communicate wirelessly with the gateway in both directions: commands are sent and status updates are received through the Smart PIERRE app.
Zigbee gateway. Needs a PIERRE display acting as gateway or through The One gateway. Requires CR2032 battery.
| Connectivity | Zigbee |
| Operating Temperature | +32°F - +131°F |
| Operating Temperature (°C) | 0 - +55 |
| Operating Humidity | 20 - 85 % RH |
| Power Supply | CR2032 Battery |
| Safety Features | Thermal protection, Tamper protection, Disconnection alarm, Anti-flammable housing |
| Built-in Sensors | Flood/Water leak |
| Low Battery Indication | Yes |
| Panel Material | ABS+PC material |
| Product Color | White |
| Mounting Type | Wall-or floor-mounted |
Use a clean and dry towel to clean the area where you want to mount the sensor. Tear off the adhesive tape, and press hard for about 10 s to fix it
Take out the insulation sheet.
If the LED indicator is not blinking rapidly, open the back cover and hold the reset button for about 5 seconds until the indicator starts blinking rapidly.
Please scan the QR code to download PIERRE application
Log in with your Username and Password
Open Settings and press "Add Wave I/O"
Press and hold the Reset button for about 5 seconds until the indicator starts blinking rapidly (see Installation).
Press "Find Devices"
PIERRE application will show the list of available devices. Press "Add found devices"
Enter Name, Role and Group settings and Save it
When the Light indicator stops flashing, the PIERRE Wave pairing process is finished
How to install and pair the water leak sensor. https://www.youtube.com/watch?v=9JB9t9U2ufE
The leak sensor should be placed near water sources like sinks, water heaters, or pipes, so it can detect leaks quickly.